• Manual
  • Video gallery
  • Software updates

Detail information for child seat manufacturers

The table provides detailed information for child seat manufacturers on which locations in the car are appropriate for which types of child seat.
PS-2007-Safety–Child restraint placement overview
Seat positions in a left-hand drive car.
PS-2007-Safety–Child restraint placement overview right-hand drive
Seat positions in a right-hand drive car.
Seat position112 (with deactivated airbag, only rear-facing child seats)2, 32 (with activated airbag, only front-facing child seats)2, 3334453
Seat position suitable for universal category restraints which are attached using the car's seatbelt (Yes/No).NoYes5Yes5YesYesYes
Seat position for i-Size (Yes/No)NoYes6, 7Yes6, 7YesNoYes
Seat position lateral fixture (L1/L2/No)NoNoNoNoNoNo
Largest suitable rearward facing fixture (R1/R2/R3/No)NoR38NoR3NoR3
Largest suitable forward facing fixture (F1/F2/F2x/F3/No)NoNoF35, 8F3NoF3
Largest suitable booster fixture (B2/B3/No)NoNoB3B3NoB3
  1. 1 In accordance with illustration.
  2. 2 The seat cushion extension must always be retracted for the installation of child restraint systems.
  3. 3 A child seat with support legs can be used on this seat.
  4. 4 A child seat with support legs cannot be used on this seat.
  5. 5 Adjust the backrest to a more upright position.
  6. 6 Varies depending on market.
  7. 7 For child restraint systems with support legs, adjust the seat to a more raised position.
  8. 8 Works for the installation of i-Size child restraint systems and ISOFIX child restraint systems (IL) if the passenger seat is equipped with ISOFIX mountings (varies depending on market) and is i-Size-marked. The upper mounting point for child restraint systems is only available for an i-Size marked position.

Related articles