• Manual
  • Video gallery
  • Software updates

Table for location of ISOFIX child seats

The table gives a recommendation for which ISOFIX child seats suit which locations, and for what size of child.

The child seat must be approved in accordance with UN Reg R44 and the car model must be included in the manufacturer's vehicle list.

 Note

Always read the Manual section on installing a child seat before installing one in the car.
WeightSize class1Type of child seatFront seat (with deactivated airbag, only rear-facing child seats)2, 3, 4Front seat (with activated airbag, only front-facing child seats)2, 3, 4Outer rear seatCentre rear seat

Group 0

max 10 kg

ERear-facing infant seatIL2, X5XILX

Group 0+

max 13 kg

ERear-facing infant seatIL2, 6, X5XILX
CRear-facing child seat
DRear-facing child seat

Group 1

9-18 kg

AFront-facing child seatXIL2, 6, 7, X5IL7, IUF7X
BFront-facing child seat
B1Front-facing child seat
CRear-facing child seatIL2, 6, 8, X5XIL8X
DRear-facing child seat

Group 2/3

15-36 kg

Front-facing child seatXILILX

IL: Suitable for particular ISOFIX child restraint systems. These child restraint systems are those of the specific vehicle, restricted or semi-universal categories.

IUF: Suitable for ISOFIX forward child restraint systems of universal category approved for use in the mass group.

X: Not suitable for ISOFIX child restraint systems.

 Warning

Never use a rear-facing child seat on the front passenger seat if the passenger airbag is activated.

 Note

If an ISOFIX child seat has no size classification, the car model must be included on the vehicle list for the child seat.
  1. 1 For child seats with the ISOFIX fixture system there is a size classification to help users choose the right type of child restraint system. The size class can be read on the child restraint system's label.
  2. 2 Works for the installation of i-Size child restraint systems and ISOFIX child restraint systems (IL) if the passenger seat is equipped with ISOFIX mountings (varies depending on market) and is i-Size-marked. The upper mounting point for child restraint systems is only available for an i-Size marked position.
  3. 3 The seat cushion extension must always be retracted for the installation of child restraint systems.
  4. 4 For child restraint systems with support legs, adjust the seat to a more raised position.
  5. 5 Applicable if the car is not fitted with an ISOFIX bracket.
  6. 6 Adjust the backrest so that the headrest does not interfere with the child seat.
  7. 7 Polestar recommends rear-facing child seat for children in this mass group.
  8. 8 Polestar recommends: BeSafe iZi Kid X2 i-Size (type approval E4-129R-000002).