Polestar
Polestar 2
Polestar 4
Polestar 4 coupé
Manual
Video gallerySoftware updates
  • A typical driving cycle
    Turning the car offSelecting gear

Adjusting One pedal drive

You can adjust how much braking force One pedal drive applies when you release the accelerator.

You can turn One pedal drive on and off via the centre display. You can also adjust how much braking force is applied by selecting a setting.

 Warning

Keep the brake pedal in mind

There is a limit to the braking force that can be applied by releasing the accelerator when using One pedal drive. For hard braking you need to use the brake pedal.

Press the car symbol in the bottom bar.

Go to Drive → One pedal drive.

Select a setting.

 Tip

You can also adjust One pedal drive using the buttons on the steering wheel. The driver display typically shows what actions are available to control through these buttons.