Using controls for door mirrors

The door mirror positions are adjusted with the joystick in the driver's door control panel. The car's electrical system must be active.

Folding in rearview mirrors electrically

The mirrors can be retracted for parking/driving in narrow spaces.

Fold out the mirrors by pressing down the L and R buttons simultaneously. The mirrors stop automatically in folded out mode with the previous setting.

Restoring to original position

Mirrors that have been moved out of position by an external force must be reset electrically to their original position for electric retracting/extending to work correctly.

The mirrors are returned to their original position.

Angling during parking

A door mirror can be angled down for the driver to view the side of the road when parking, for example.

Note that the button may need to be pressed twice, depending on whether it was already preselected. The button flashes when the door mirror is angled down. When reverse gear is disengaged, the door mirror automatically starts to return after approx. 3 seconds and then reaches its original position after approx. 8 seconds.

Automatic angling during parking

With this setting, the door mirror is automatically angled down when reverse gear is selected. The folded position is preset and cannot be adjusted. This is so that the driver can, for example, see the edge of the road while parking.

Tap on in the centre display.

Press Assist.

Select .

Tap on the button for mirrors and select the preferred setting.

You can make the door mirror return to its original position by pressing the L or R button twice.

Automatic retraction when locking

In the centre display, you can set all the rearview and door mirrors to retract/extend automatically when the car is locked/unlocked using the key.

Tap on in the centre display.

Press Assist.

Select .

Tap on the button for mirrors and select the preferred setting.