• Manual
  • Video gallery
  • Software updates

Charge cable

The charging cable is used to charge the vehicle's high-voltage battery.

 Important

The charging cable is used to charge the vehicle's high-voltage battery. The charging cable is designed to satisfy Polestar's safety standard. Use a charging cable recommended by Polestar, thereby guaranteeing its function and safety. Polestar accepts no responsibility for safety or any injury caused by a charging cable that is not recommended by Polestar.

 Warning

Only use the charging cable provided with your vehicle or a replacement cable recommended by Polestar.
Specifications, charging cable

Enclosure class

Compliance

IP67

SAE J1772

Ambient temperature

-32 °C to 50 °C(-25 °F till 122 °F)

 Warning

  • The charging cable must be grounded when in use. It is equipped with a cord with a grounding conductor and a grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances and is not damaged in any way.
  • Children should be supervised when in the vicinity of the charging cable when it is plugged in.
  • High voltage is present in your electric meter housing and power distribution service panel. Contact with high voltage can cause death or serious personal injury.
  • Do not use the charging cable if it is damaged in any way. Damaged or malfunctioning charging cables may only be repaired by a workshop – contact Polestar Customer Support for more information.
  • Always position the charging cable so that it will not be driven over, stepped on, tripped over or otherwise damaged, or cause personal injury.
  • Disconnect the charger from the wall outlet before cleaning it.
  • Never connect the charging cable to an extension cord or a multiple plug socket.
  • Do not use any adapters between the charging cable and electrical outlet.
  • Do not use an external timer between the charging cable and electrical outlet.

Also, refer to the manufacturer's instructions for using the charging cable and its components.

 Important

Power strips, extension cords, surge protectors or similar devices must not be used together with the charging cable since this may involve a risk of fire, electric shocks, etc.

An external timer or adapter may not be used between the 120/240 V outlet (AC, alternating current) and the charging cable.

 Important

Never detach the charging cable from the 120/240 V outlet (AC, alternating current) while charging is in progress – the 120/240 V outlet could be damaged in such circumstances. Always interrupt charging first and then disconnect the charging cable – first from the vehicle's charging socket and then from the 120/240 V outlet.

 Important

Wipe the charging cable with a clean cloth lightly moistened with water or a mild detergent. Do not use chemicals or solvents.
PS2-2040- Warning charging intake

 Warning

The charging cable and its components must not be rinsed or immersed in water.

 Important

Avoid exposing the charging module and its plug to direct sunlight. In such cases, the overheating protection in the plug could reduce or cut off charging of the high-voltage battery.