Polestar
Polestar 2
Polestar 4
Polestar 4 coupé
Manual
Video gallerySoftware updates

Park assist pilot

Park assist pilot can help you manoeuvre in and out of parking spaces.

When active, park assist pilot controls the car. It works for different types of parking spaces, helping you to park the car as well as leave a parking space. Park assist pilot controls steering, acceleration and braking during the manoeuvre. You can activate it in the parking view.

 Warning

Driver responsibility

Driver support features are a supplement to safe driving practices. They do not reduce or replace the need for the driver to stay attentive and focused on driving safely. The driver is always responsible for paying attention to the car's surroundings and ensuring that it is safe to manoeuvre the car. You can find out more about driver responsibility in a separate section of this manual.

 Important

Read everything

Read all information about the function before using it. It is important to know its proper use and limitations.

 Tip

You can adjust certain settings for park assist pilot. For example, you can enable park assist pilot to activate automatically when you select the reverse gear while the car is stationary and a suitable parking space is detected nearby.

Parking in a parking space

You can use park assist pilot for parallel, perpendicular and diagonal parking.

When you activate park assist pilot, it identifies available spaces close to the car and shows them in the centre display. After selecting a parking space, pressing the start button and releasing the brake pedal, the car starts moving. Make sure you supervise the manoeuvre and follow any instructions in the centre display.

Leaving a parking space

You can use park assist pilot when driving forwards out of a parking space, if you used park assist pilot to park there. When you activate park assist pilot, the car suggests an exit path. After confirming the path, you need to supervise the manoeuvre and follow any instructions in the centre display.

Starting, pausing and stopping a parking manoeuvre

To be able to start park assist pilot the following is required:
  • There are clear markings indicating the parking space.
  • No obstacle is detected.
  • The cameras and sensors are clean and working properly.
  • The boot, bonnet or doors are closed.
  • The wing mirrors are folded out.
  • The driver's seatbelt is buckled.

If any of the requirements change during the manoeuvre, the parking is either paused or stopped. Park assist pilot can often resume when all requirements are fulfilled again.

 Note

You can press the brake pedal to pause whenever necessary. When your car is stopped you can choose to continue or exit the manoeuvre.
You can exit park assist pilot in different ways. For example, you can:
  • press cancel in the display
  • start steering manually
  • press the accelerator
  • change gear.

Conditions and limitations

 Warning

Component limitations

It's the cameras, radars and sensors that provide the car with information about the driver and the surroundings. Cameras, radars and sensors have limitations and cannot detect all obstacles in every situation. You can find out more about their conditions and limitations in a separate section of this manual.

 Note

Towbar

If you have a towbar installed, some parking assistance features may be affected or unavailable. You will not be able to use park assist pilot if the towbar is extended.

Articles in this category

Parking using park assist pilot

You can activate park assist pilot in the parking view. It's capable of parallel, perpendicular and diagonal parking.

Read more

Leaving a parking space using park assist pilot

Park assist pilot can help you manoeuvre the car out of a parallel parking space in a forward direction, if you used park assist pilot to park there.

Read more