Polestar
Polestar 2
Manual
Video gallerySoftware updates
    Driver behavior detection

Park assist pilot

Park assist pilot can help you maneuver in and out of parking spaces.

When active, park assist pilot controls the vehicle. It works for different types of parking spaces, helping you to park the vehicle as well as leave a parking space. Park assist pilot controls steering, acceleration and braking during the maneuver. You can activate it in the parking view.

 Warning

Driver responsibility

Driver support features are a supplement to safe driving practices. They do not reduce or replace the need for the driver to stay attentive and focused on driving safely. The driver is always responsible for paying attention to the vehicle's surroundings and ensuring that it is safe to maneuver the vehicle. You can find out more about driver responsibility in a separate section of this manual.

 Important

Read everything

Read all information about the function before using it. It is important to know its proper use and limitations.

Parking in a parking space

You can use park assist pilot for perpendicular and diagonal parking.

When you activate park assist pilot, it identifies available spaces near the vehicle and shows them in the center display. After selecting a parking space, pressing the start button and releasing the brake pedal, the vehicle starts moving. Make sure you supervise the maneuver and follow any instructions in the center display.

Leaving a parking space

You can use park assist pilot when driving forward out of a parking space if you used park assist pilot to park there. When you activate park assist pilot, the vehicle suggests an exit path. After confirming the path, you need to supervise the maneuver and follow any instructions in the center display.

Starting, pausing and stopping a parking maneuver

To be able to start park assist pilot, the following is required:
  • There are clear markings indicating the parking space.
  • No obstacle is detected.
  • The cameras and sensors are clean and working properly.
  • The trunk, hood or doors are closed.
  • The door mirrors are folded out.
  • The driver's seat belt is buckled.

If any of the requirements change during the maneuver, parking is either paused or stopped. Park assist pilot can often resume when all requirements are fulfilled again.

 Note

You can press the brake pedal to pause whenever necessary. When your vehicle is stopped, you can choose to continue or exit the maneuver.
You can exit park assist pilot in different ways. For example, you can:
  • press cancel in the display
  • start steering manually
  • press the accelerator
  • shift the gear.

Conditions and limitations

 Warning

Component limitations

The cameras, radars and sensors provide the vehicle with information about the driver and the surroundings. Cameras, radars and sensors have limitations and cannot detect all obstacles in every situation. You can find out more about their conditions and limitations in a separate section of this manual.

 Note

Towbar

If you have a towbar installed, some parking assistance features may be affected or unavailable. You will not be able to use park assist pilot if the towbar is extended.

Related articles