• Manual
  • Video gallery
  • Software updates

Charging status in the instrument panel

Charging status is indicated in the instrument panel using both graphics and messages. This information is displayed as long as the instrument panel is active.
ColorStatusMeaning
Pulsating greenThe instrument panel frame will appear with a green, pulsating light.Download in progress and an approximate time until the vehicle is fully charged is displayed.
GreenThe instrument panel frame will appear with a steady green light.The vehicle is fully charged.
RedThe instrument panel frame will appear with a steady red light.

Malfunction. Check the charging cable's connection to the vehicle's charging socket and power source.

Then restart charging using the following steps:
  1. Unplug the charging cable from the charging socket.
  2. Wait for a moment.
  3. Plug the charging cable back into the charging socket.
  4. If the problem persists, contact Polestar Customer Support.
BlueThe instrument panel frame will appear with a steady blue light.Scheduled charging activated.
YellowThe instrument panel frame will appear with a steady yellow light.Charging is waiting to start or has been paused.
In addition to charging status, the following is also shown in the instrument panel:
  • current amperage and set amperage as well as number of phases1.
  • charging output
  • battery percentage
  • time until the vehicle is fully charged.

 Note

If the instrument panel is not used, it will go dark after a period of time. Activate the display again by opening one of the doors. Read more in the instrument panel section.
  1. 1 Current amperage and set amperage applies per phase from the AC power source.