Polestar
Polestar 2
Manual
Video gallerySoftware updates
  • A typical driving cycle
    Turning the vehicle offSelecting the gear

Adjusting One Pedal Drive

You can adjust how much braking force One Pedal Drive applies when you release the accelerator.

You can turn One Pedal Drive on and off via the center display. You can also adjust how much braking force is applied by selecting a setting.

 Warning

Keep the brake pedal in mind

There is a limit to the braking force that can be applied by releasing the accelerator when using One Pedal Drive. For hard braking, you need to use the brake pedal.

Press the vehicle symbol in the bottom bar.

Go to Drive → One pedal drive.

Select a setting.

 Tip

You can also adjust One Pedal Drive using the buttons on the steering wheel. The instrument panel typically shows the actions that are available to control through these buttons.