Polestar
Polestar 2
Manual
Video gallerySoftware updates
  • A typical driving cycle
    Turning the vehicle offSelecting the gear

Enabling automatic creeping

When creeping is enabled, the vehicle can automatically move slowly without you needing to use the accelerator. This can be useful when you are in traffic queues or parking lots.

When you start your vehicle with creeping enabled, you first need to press the accelerator to start the automatic creeping. When movement has started, you no longer need to use the accelerator to creep. However, if you have just come to a slight stop, you can initiate creeping just by releasing the brake pedal.

Press the vehicle symbol in the bottom bar and go to Settings..
Go to Drive → Creep.
Turn it on or off.

 Tip

Pressing down hard on the brake pedal temporarily pauses creeping and activates auto hold. Press the accelerator to initiate creeping again.