Using the electrical outlets
The 12 V outlet can be used for devices intended for this, such as coolers.
The vehicle must be in Comfort or Drive mode for the outlet to supply current.
The outlet will switch off automatically when the driver exits the vehicle. If the vehicle remains unlocked, the outlet will remain active for about 10 minutes.
Note
Accessories connected to the electrical outlet can be activated even when the vehicle electrical system is off or if preconditioning is used. For this reason, unplug accessories when they are not being used.
Warning
- Do not use accessories with large or heavy plugs – they could damage the outlet or come loose while you are driving.
- Do not use accessories that could cause disruptions to e.g. the vehicle's radio receiver or electrical system.
- Position the accessory so that there is no risk of it injuring the driver or passengers in the event of heavy braking or a collision.
- Pay attention to connected accessories as they can generate heat that could burn passengers or the interior.
Using 12 V outlets
Fold down the cover over the outlet and plug in the accessory.
Unplug the accessory and fold up the cover when the outlet is not being used or is left unattended.
Important
Maximum power output is 120 W (10 A).
Warning
- Only use accessories that are not damaged or malfunctioning. The accessories must be CE marked, UL marked or have an equivalent safety marking.
- New let outlets, plugs or accessories come into contact with water or another fluid. Do not touch or use the outlet if it appears damaged or has been in contact with water or another fluid.
- Do not connect power strips, adapters or extension cords to the outlet has this could cause the outlet's safety functions to malfunction.
Failure to follow the above could lead to severe or fatal electrical shocks.