Manual
Video gallerySoftware updates

Stopping DC charging

You can stop the charging process at any time.

 Important

Stop the charging session before attempting to unplug the cable from the car's charging port. If you do not, you may cause damage to the cable or to the system.
Press Stop charging in the centre display to stop charging.

The charging is stopped and the charging cable's handle unlocks. This may take a couple of seconds.

Unplug the charging cable from the car.
If available, reattach the protective cover on the cable connector.
Reattach the charging port's protective cover then press Close charge port in the centre display to close the charging lid.

 Note

You can also close the charging lid by pressing the button located on the right-hand side of the inside of the port.

When the charging cable is unplugged from the car, the lid is automatically closed after a short period of time. If you start driving and the charging lid is open, it closes automatically.

However, there are also situations where the charging lid doesn’t close automatically. If you remove the charging cable but the car is in sleep mode and no key is detected close to the car, the charging lid may stay open until the car is woken up.

 Tip

You can also stop the charging process via the charging station or from the Polestar app.

Related articles