Polestar
Polestar 2
Manual
Video gallerySoftware updates
      • Overtaking AssistanceUse Overtaking Assistance
      Cruise control functionsSteering wheel buttons for the cruise control functionsSelecting and activating the cruise control functionDeactivating cruise control functionsIntelligent Speed Assist (ISA)
    Driving support systemsWarnings from various driver support systemsSpeed-dependent steering forceReady to drive notificationAuto braking after a collision

Use Overtaking Assistance*

Overtaking assistance can be used with adaptive cruise control* or Pilot Assist*.
The following conditions must exist for Overtaking Assistance to be activated:
  • there must be a vehicle in front (the “target vehicle”)
  • your car's current speed is at least 70 km/h (43 mph)
  • the stored speed must be high enough for overtaking to take place safely.
To start the Overtaking Assistance:

Activate the direction indicator. Use the left-hand direction indicator in a left-hand drive car right in a right-hand drive car.

Overtaking Assistance begins acceleration and reduces the time interval the vehicle ahead for a limited period in order to facilitate overtaking. If no overtake is executed, the time interval returns to the preset value.

 Warning

When using the Overtaking Assistance System, the driver should be aware that there may be undesired acceleration if the conditions suddenly change.

Some situations should therefore be avoided, such as if:
  • the car is approaching an exit to turn-off in the same direction as overtaking would normally occur
  • the vehicle ahead slows down before the driver's car has crossed over into the overtaking lane.
  • the traffic in the overtaking lane slows down.
  • a right-hand drive car is driven in a county with left-hand traffic (or vice versa).

Situations of this type are avoided by setting the adaptive cruise control or Pilot Assist to standby mode.

  1. * Option/accessory.