Using a stored position for seat, door mirrors and head-up display
If the positions for the power seat, the door mirrors and the head-up display have been stored, they can be activated by using the memory buttons.
Using a stored setting
To use a stored position, hold one of the memory buttons depressed, 1 (
) or 2 (
), until the stored position is reached.
If the memory button is released, the movement of the seat, door mirrors and head-up display will be stopped.
Warning
- Because the driver's seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
- Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
- Do not adjust the seat while driving.
- Make sure there is nothing under the seats when they are being adjusted.