Polestar
Polestar 2
Manual
Video gallerySoftware updates
    Driver behavior detection

Adjusting Pilot Assist settings

You can adjust or change which features are enabled for Pilot Assist in settings.

Pilot Assist includes several features, some of which you can enable, disable or customize in settings. This allows you to set Pilot Assist up for the level of support you want.

The customizable settings include:
Steering assistanceGuides the steering wheel movement to correctly position the vehicle in the lane.
Lane change assistGuides lane change maneuvers initiated by the driver.
Curve speed assistDriving speed is adapted ahead of known road features such as curves and roundabouts.
Adapt to speed limitThe speed limit of the road you're on appears as a suggested set speed in the instrument panel for you to confirm.
Distance to vehicle aheadAdjust the target time interval to vehicles ahead. This way, you can adjust the distance to vehicles in front of you.

 Tip

Customizing Pilot Assist features using the steering wheel buttons

Features such as steering assistance and target speed can be adjusted using the steering wheel buttons. The instrument panel typically shows what actions are available and which buttons to use.

Quick access

You can adjust the time interval to vehicles ahead via the quick controls view in the center display as well. This allows you to make quick adjustments, without going into settings.

 Important

Changing driver support settings

Make sure you understand how changing vehicle settings affects its behavior. This is particularly important for features that affect the level of assistance the vehicle can provide.

Press the vehicle symbol in the bottom bar and go to Settings.
Go to AssistPilot Assist.
The Pilot Assist settings view appears.
Customize the Pilot Assist settings to your preferences.

 Note

Adjusting the time interval to vehicles ahead

When driving at higher speeds, the general distance to a vehicle ahead will be longer than when driving at lower speeds, even if the target time interval is the same. This is because the calculated distance becomes longer for the given time interval.