• Manual
  • Video gallery
  • Software updates

Using the rain sensor

The rain sensor monitors the amount of water on the windshield and automatically starts the windshield wipers. Rain sensor sensitivity can be adjusted using the thumb wheel on the right-hand steering wheel lever.
PS-2007-Rain sensor
Right-hand steering wheel lever.
  1. PS-Icon circle 1Rain sensor button
  2. PS-Icon circle 2Thumb wheel, sensitivity/interval wiper speed

When the rain sensor is activated, the PS-1926-Rain sensor symbol - combi instrument rain sensor symbol will be displayed in the instrument panel.

The rain sensor is automatically on or off when the vehicle is started depending on which mode it was in when the vehicle was switched off.

Activating the rain sensor

When the rain sensor is activated, the windshield wipers must be in 0 position or in the single-sweep position.

Activate the rain sensor by pressing the rain sensor button PS-1926-Rain sensor symbol - combi instrument.

Move the lever downward for an extra wiper sweep.

Turn the thumb wheel upward for increased sensitivity and downward for decreased sensitivity. The wipers will make one extra sweep when the thumb wheel is turned upward.

Deactivate the rain sensor

Deactivate the rain sensor by pressing the PS-1926-Rain sensor symbol - combi instrument rain sensor button or moving the lever upward to another wiper mode.

The rain sensor is automatically deactivated when the vehicle is switched off.

The rain sensor is also automatically deactivated when the wiper blades are put in the service position. The rain sensor will reactivate when service mode is switched off.

 Important

The windshield wipers may start inadvertently and be damaged in automatic car washes. Switch off the rain sensors before washing the vehicle. The symbol in the instrument panel will go out.