Manual
Video gallerySoftware updates

Charging status in the charging cable's control module

The indicator on the charging cable's control module shows the status of charging in progress.

Control module with indicator

PS2- 2007- Control module cable
The control module's LED1 indicator.
PS-Icon circle 1LED indicator
LEDStatusMeaningRecommended action
OffCharging is not possible.No power supply to charging cable.
  1. Unplug the charging cable from the outlet.
  2. Plug the charging cable back into the outlet or use another outlet.
  3. If the problem persists, contact Polestar Customer Support.
Steady white lightCharging possible.The charging cable is ready to be plugged into the vehicle.
If the LED indicator is white but charging is not possible:
  1. Unplug the charging cable from the charging socket.
  2. Plug the charging cable back into the charging socket.
  3. If the indicator doesn't begin flashing white within 10 seconds, unplug the charging cable from both the charging socket and the wall outlet. Plug the charging cable back into the charging socket and the wall outlet.
  4. If the problem persists, contact Polestar Customer Support.
Flashing white lightCharging is in progress.

The vehicle's electronic system has initiated charging.

Charging is in progress.

Wait until the batteries are fully charged.
Steady red lightCharging is not possible.Temporary fault.
  1. Unplug the charging cable from the charging socket.
  2. Wait for a moment.
  3. Plug the charging cable back into the charging socket.
  4. If the problem persists, contact Polestar Customer Support.
Flashing red lightCharging is not possible.Critical fault.Unplug the charging cable from the outlet. If the problem persists, contact Polestar Customer Support.
  1. 1 LED (Light Emitting Diode)

Related articles