• Manual
  • Software updates

Active bending lights*

Active bending lights1 are designed to provide additional illumination in bends and at junctions.
PS-2007-Active Bending Light-Light pattern
Headlamp pattern with function deactivated (left) and activated (right) respectively.

Active bending lights follow steering wheel movements to provide additional illumination in bends and junctions and can thereby provide the driver with improved visibility.

The function is activated automatically when the car is started. In the event of a fault in the function, the PS-1926-Active Bending Lights symbol symbol illuminates in the driver display at the same time as the driver display shows an explanatory text.

The active bending lights are only switched on in weak daylight or in darkness as well as when the stalk switch's rotating ring is in PS-1926-Left-side steering wheel lever-AUTO symbol position. The car also needs to be in motion with main beam or dipped beam activated.

The function can also be activated/deactivated via the centre display.

Tap on PS2-2007-Car symbol in the centre display.
Then tap on More.
Select Exterior lights and activate/deactivate active bending light.
  1. * Option/accessory.
  2. 1 Some Pilot pack equipment may not be installed in your car model due to the global semiconductor shortage. For more information, contact Polestar Customer Support.