Checking trailer lamps*
When connecting a trailer - check that all the trailer lamps work before departure.
Direction indicators and brake lights on the trailer
If one or more of the trailer's direction indicators or brake light bulbs is broken, the driver display shows a symbol and a message. Other lights on the trailer must be checked manually by the driver before setting off.
| Symbol | Message |
|---|---|
 | Right trailer turn indicator malfunction Left trailer turn indicator malfunction |
 | Trailer brake light malfunction |
If any lamp for the trailer's direction indicators is broken, the driver display symbol for direction indicators will also flash more quickly than normal.
Checking trailer lamps*
Automatic checking
After a trailer is connected electrically, it is possible to ensure that the trailer lamps are working via an automatic lamp activation. The function helps the driver check that the trailer lamps are working before starting off.
When a trailer is connected to the towbar, the Perform a trailer lamp check? message is shown in the driver display.
Confirm the message by pressing the right-hand steering wheel keypad's O button.
The lamp check starts.
Exit the car to check lamp functionality.
All trailer lamps start to flash - then the lamps are switched on one at a time.
Visually check that all lamps available on the trailer are operational.
After a moment, all lamps on the trailer flash again.
The check is complete.
Checking trailer lamps
To change the settings for checking trailer lamps:
Press 
in the centre display.
in the centre display.Press More.
Select Exterior lights.
Change the settings you want.