Adjusting One Pedal Drive
Braking by using One Pedal Drive can be adjusted, enabled or disabled in drive settings.
The available settings are:
| Standard | The function is on. |
| Low | When you ease up on the accelerator, the vehicle will brake with less force than in the standard setting. |
| Off | The function is off. Releasing the accelerator does not engage the brakes. |
Warning
Keep the brake pedal in mind
There is a limit to the braking force that can be applied by releasing the accelerator when using One Pedal Drive. For hard braking, you need to use the brake pedal.
Press the vehicle symbol 
in the bottom bar and go to Drive.
Go to One Pedal Drive.
Select a setting.
Tip
You can also adjust One Pedal Drive using the buttons on the steering wheel. The instrument panel typically shows the actions that are available to control through these buttons.