Rearview mirror
The rearview mirror has two modes. Camera display mode shows the view from the rear-view camera, which can be used to see what's going on behind your vehicle. Mirror mode can be used if you want to see what is happening in the rear seats, but it won't show you anything behind the vehicle. You can switch between the two modes by using the mode control switch on the bottom of the mirror.
When camera display mode is active, the camera symbol 
appears in the top left of the rearview mirror.
Turning the camera feed off allows the display to work like a conventional mirror.
When using the turn signals, the camera view shifts to the sides to aid rearward visibility.
The rearview mirror is located above the center display.
The camera for the rearview mirror camera display mode is located on the upper part of the trunk hatch.
Important
Driver responsibility
Rearward visibility and driving awareness are essential for your safety and the safety of others.
Make sure you adjust any camera display settings before driving. Always avoid distractions and performing other operations while driving.
- Be aware that the camera has a limited field of view.
- Be careful when judging distances to objects.
- The camera display mode cannot compensate for visual impairment. If you have prescription glasses or contact lenses that should be worn when driving, be sure to wear them.
Care and maintenance
Keep the camera clean and clear of obstructions and dirt. The areas around the camera and other relevant sensors must be cleaned on a regular basis and kept free of labels, objects, dirt and other kinds of potential obstructions. Failure to do so may cause functions to be less effective or deactivated or to give incorrect responses.
Do not scrape or use any abrasive cleaning agent on the mirror or touch buttons. This can damage the display surface and electronic components.
If necessary, contact Polestar Customer Support for advice on cleaning or maintenance.