Speed limit and speed camera warnings from Road Sign Information*
There are subfunctions for Road Sign Information (RSI1) that can alert the driver if the vehicle exceeds the speed limit or if there are speed cameras2.
This function is available in certain markets.
Speed limit warning
Speed alerts are provided by the symbol3 in the instrument panel flashing when the maximum permitted speed is exceeded. The maximum permitted speed consists of the current speed limit plus any offset value, which can be selected in the center display under settings.
The warning is repeated once after about 30 seconds if the speed is not reduced.
After this, new warnings will only be provided if the speed is reduced by at least 5 km/h(3 mph) under the speed limit and then exceeded again. A new warning can also be provided if the vehicle enters a new speed limit zone.
The driver can be alerted if the vehicle is exceeding a detected speed limit and is approaching a speed camera.2
Note
Speed camera warning
Vehicles equipped with Road Sign Information and map data2 can provide information on upcoming speed cameras in the instrument panel.