Pinch protection for windows
All power windows in your vehicle have a pinch protection function that is triggered if anything blocks them while they are opening or closing.
If pinch protection is activated, movement will stop and then retract automatically to approx. 50 mm (2 inches) from the point at which it was blocked (or to full ventilation position).
It is still possible to override pinch protection when closing is interrupted (e.g. due to ice) by pressing and holding down the control in the same direction.
If there is any problem with the pinch protection, a rest procedure can be tested.
Warning
If the 12 V battery is disconnected, the function for automatic opening and closing must be reset to function correctly. A reset is required in order for the pinch protection to work.