• Manual
  • Video gallery
  • Downloads
  • Software updates

Using a wireless telephone charger*

It is possible to charge a phone on the rubber pad under the centre display without having to use a phone cable.


Wireless charging can affect the operation of an implanted pacemaker or other medical devices. If you have one, it is recommended to consult with your doctor before using the wireless charging system.

Activating and deactivating the wireless charger

The wireless charger is activated during factory setting. Sometimes, it can help to deactivate the charger, for example when you want to put your phone on the rubber panel without also charging it. To deactivate and activate it:
Go to settings PS2_2007_Settings symbol at the bottom of the centre display and then tap on Controls.
Adjust the controls next to Wireless phone charger.

Charging a unit with the wireless charger

PS2-2007-Wireless Phone Charger
Wireless phone charger under the centre display.
Check that the charger is activated.
Remove all other objects from the charger.
Place the unit to be charged in the middle of the charger.
The unit starts to charge and the symbol PS2-2007-Wireless phone charging symbol is shown at the top of the centre display.


Avoid storing cards or other objects with NFC (Near Field Communication), e.g. bank cards for contactless payment, with the unit to be charged. It can damage these types of objects and interfere with the charging.


  • The charging process may vary depending on the type of unit to be charged. For example, the time before charging starts or before the unit is fully charged can vary.
  • Devices may get hot during charging. This is normal.

If the unit does not charge:

  • Check in the centre display that the charger is activated.
  • Check that the charger is clear of other objects.
  • Check that the unit supports wireless charging (Qi).
  • Lift the unit and place it back in the middle of the charger.
  • Remove any case or protector that may be on the unit.
  • Check that the car is running.
  • Check that the unit has not slid off the charger while driving.
  • If any of the doors are opened, charging is interrupted for several seconds.
  • If the unit's temperature becomes too high during charging the charging function is deactivated.
  • Deactivate the function for NFC (Near Field Communication) if the unit has one.

If the object on the charger is preventing charging, a message is shown in the centre display.


Keep the unit and charger away from other objects while charging in order to prevent overheating.
  1. * Option/accessory.