• Manual
  • Video gallery
  • Software updates

Setting stored speed for speed-controlling functions

It is possible to adjust set speeds for the cruise control, Adaptive Cruise Control* and Pilot Assist* functions.

PS2-2007-Adjust speed for Adaptive Cruise Control and Pilot Assist
PS-Icon circle 1PS-1926-Steering wheel Plus button symbol: Increases the set speed
PS-Icon circle 2PS-1926-Steering wheel Minus button symbol: Reduces the set speed
PS-Icon circle 3Set speed
Change a set speed by pressing the PS-1926-Steering wheel Plus button symbol (1) or PS-1926-Steering wheel Minus button symbol (2) buttons briefly or by pressing and holding them:
  • Brief press: Each press changes the speed in +/- 5 km/h(+/- 5 mph) increments.
  • Press and hold: Release the button when the set speed indicator (3) has moved to the desired speed.
The most recently set speed will be stored.

 Note

For vehicles without Adaptive Cruise Control*, speed instead increases by +/- 1 km/h(+/- 1 mph) each time the button is pressed.

Using the accelerator pedal

If speed is increased by depressing the accelerator pedal while pressing the PS-1926-Steering wheel Plus button symbol (1) button on the steering wheel, the vehicle's speed when the button is pressed will be stored as the set speed.

Temporarily increasing speed using the accelerator pedal, e.g. when passing another vehicle, will not affect the setting. The vehicle will return to the set speed when the accelerator pedal is released.

Possible speed

The lowest speed that can be set is 30 km/h(20 mph). When following another vehicle, ACC can monitor that vehicle's speed and slow your own vehicle down to a standstill, but it is not possible to set speeds lower than 30 km/h(20 mph).

The driver support functions can follow another vehicle at speeds from a standstill up to 200 km/h(125 mph).

Pilot Assist can provide steering assistance from near-stationary speeds up to 140 km/h(87 mph).

  1. * Option/accessory.

Related articles