• Manual
  • Video gallery
  • Software updates

One Pedal Drive

There are three different levels of One Pedal Drive, which indicate the regenerative braking effect that is controlled by the accelerator pedal, without use of the brake pedal.

The vehicle's factory default setting is Standard mode. Adapts braking effect to the driving situation in which the vehicle is used, e.g. snowy or icy roads.

Setting in the center display

Tap PS2-2007-Car symbol.
Select Drive.
Adjust braking effect preferences under One Pedal Drive.
PositionBraking effect
OffNo braking power will be applied and the vehicle will roll freely.
LowSome braking effect is applied, with a driving feel similar to that of engine braking.
StandardHigh braking effect, suitable for city driving.

 Note

Polestar recommends braking hard regularly using the friction brakes to avoid problems with the brake discs caused by inactivity, such as rust or accumulation of dirt.

Related articles