• Manual
  • Video gallery
  • Software updates

Charging status in the car's charging input socket

The LED lamp in the car's charging input socket shows the current status for charging in progress. The table below gives explanations for the different shades of the LED lamp.
LED lamp's glowSpecification
WhiteLED light
Flashing amberThe charging process is about to be interrupted.
YellowWaiting mode1 - waiting for charging to start.
Flashing greenCharging in progress2.
GreenCharging complete3
Red

A fault has arisen. Check the charging cable's connection to the car's charging input socket and power source.

Then restart charging in the following steps:
  1. Unplug the charging cable from the charging input socket.
  2. Wait for a short time.
  3. Plug the charging cable into the charging input socket again.
  4. If the problem persists - contact Polestar Customer Support.
Flashing red

The car is locked and does not detect a key when unlocking the charging cable via the button next to the charging input socket.

BlueScheduled Charging activated.

 Note

The charging input socket's LED lamp indicates status for charging the high voltage battery and not whether the car is consuming power, such as when the climate control is in use.
  1. 1 For example, after a door has been opened or if the charging cable's handle is not locked in.
  2. 2 The slower the flashing, the closer to fully charged.
  3. 3 Extinguishes after a while.