Programming HomeLink®
Note
Warning
Point the remote control at the HomeLink® button to be programmed and hold it about 2-8 cm (1-3 inches) from the button. Do not obstruct the HomeLink® indicator light.
Note: Some remote controls are more effective at programming HomeLink® from a distance of about 15-20 cm (6-12 inches). Keep this in mind if you experience any programming difficulties.
If the indicator light glows steadily: Indication that programming is complete. Press the programmed button twice to activate.
If the indicator light flashes quickly: The device being programmed with HomeLink® may have a security function that requires an extra step. Try pressing the programmed button twice to see whether the programming works. Otherwise, continue with the following steps.
![PS-1926-HomeLink Learn button](https://www.volvocars.com/images/support/img4c24d813a841c5c0c0a80152078ca70c_1_--_--_VOICEpnghigh.png)
If you experience any difficulties programming, please contact HomeLink® at: www.HomeLink.com, or call 1–800–355–3515.
Programming individual buttons
When the indicator light on HomeLink® starts flashing slowly, it is possible to program as usual.
Note: If the button you are reprogramming does not program with a new device, it will return to the previously saved programming.
Resetting the HomeLink® buttons
It is only possible to reset all HomeLink® buttons at once. It is not possible to reset individual buttons. Individual buttons can only be reprogrammed.