One Pedal Drive
There are three different levels of One Pedal Drive, which indicate the regenerative braking effect that is controlled by the accelerator pedal, without use of the brake pedal.
The vehicle's factory default setting is Standard mode. Adapts braking effect to the driving situation in which the vehicle is used, e.g. snowy or icy roads.
Setting in the center display
Tap 
.
.Select Drive.
Adjust braking effect preferences under One Pedal Drive.
| Position | Braking effect |
|---|---|
| Off | No braking power will be applied and the vehicle will roll freely. |
| Low | Some braking effect will be applied. |
| Standard | High braking effect. |
Note
Polestar recommends braking hard regularly using the friction brakes to avoid problems with the brake discs caused by inactivity, such as rust or accumulation of dirt.