Polestar 2 how-to videos


There are a few small, easy-to-learn differences between fuelling and charging. The video on this page gives you practical advice that will have you taking charge of charging.

Charging the Polestar 2

1. Open the car’s charging hatch and remove the charging plug’s protective cover.

2. Push the charging cable plug all the way into the car's input socket. It should automatically lock into place after a few seconds. 

3. Follow the instructions in the charging station's interface to authorise the charge. Before charging can begin, the charging station first performs an isolation test, which can take up to one minute. 

4. Once charging has started, the LED lamp in the charging input socket will flash green. The driver display and the centre display show the remaining estimated charging time, or if charging is not working as intended. 

5. To stop charging, press the button by the charging input socket. If fast charging is stopped, it’s not possible to resume it automatically because the charging station requires charging to be re-authorised. Unlocking your car does not usually stop fast charging.

Back to overview

Watch videos about lighting


Watch videos about opening the car

Opening the car
Polestar Automotive UK Ltd is an appointed representative of Volvo Car UK Limited which is authorised and regulated by the Financial Conduct Authority under firm reference number 678616 for credit broking. Polestar © 2021. All rights reserved.
Change location: