• Manual
  • Video gallery
  • Downloads
  • Software updates

Manual

Lighting control

The different lighting controls are used to control both exterior and interior lighting. The left-hand stalk switch activates and adjusts the exterior lighting. The interior brightness is adjusted using a thumbwheel on the instrument panel.

Exterior lighting

PS-2007-Left-side steering wheel lever-lights turning ring
Rotating ring in the left-hand stalk switch.

When the car is started, the following functions are available for the rotating ring's different positions:

PositionSpecification
PS-1926-Left-side steering wheel lever-Zero symbol

Daytime running lights.

Main beam flash can be used.

PS-1926-Left-side steering wheel lever-Position light symbol

Daytime running lights and position lamps.

Position lamps when the car is parked.1

Main beam flash can be used.

PS-1926-Left-side steering wheel lever-Low beam symbol

Dipped beam and position lamps.

Main beam can be activated.

Main beam flash can be used.

PS-1926-Left-side steering wheel lever-AUTO symbol

Daytime running lights and position lamps in daylight.

Dipped beam and position lamps in weak daylight or darkness, or when the front2 and/or rear fog lamp is activated.

The Active main beam function can be activated.

Main beam can be activated when dipped beam is switched on.

Main beam flash can be used.

PS-1926-Left-side steering wheel lever-Active High Beam Control symbolActive main beam on/off.

Polestar recommends that PS-1926-Left-side steering wheel lever-AUTO symbol mode is used when the vehicle is driven.

 Warning

The car's lighting system is not able to determine when daylight is too weak or sufficiently strong, e.g. in fog and rain, in all situations.

The driver is always responsible for ensuring that the car is driven with a beam pattern suitable for the traffic situation and in accordance with applicable traffic regulations.

Thumbwheel in instrument panel

PS-2007-Exterior lighting panel at dashboard left side
Thumbwheel (to left) for adjusting interior brightness.
  1. 1 If the car is stationary but running, the rotating ring can be moved to PS-1926-Left-side steering wheel lever-Position light symbol position from another position to switch on only the position lamps instead of other lighting.
  2. 2 Some Pilot pack equipment may not be installed in your car model due to the global semiconductor shortage. For more information, contact Polestar Customer Support.

Related articles